Bring your own setup to Clay Range.
A dedicated gun or mount is not required. What matters is that the gun and iPhone move as one.
Replica guns and clay-shooting shotguns
Register the sound of operating the trigger to fire in the game. A distinct sound works best, but quieter sounds may work depending on placement and background noise. Use without firing ammunition or caps.
On a Beretta Silver Pigeon, the developer confirmed operation using only the sound of moving the trigger after the hammer had fallen. Dropping the hammer each time is not necessary. Detection can vary between guns and environments.
Any method, provided it stays in place.
Hook-and-loop straps or rubber bands can be used. The photos show an example of attaching a MagSafe-compatible accessory by hooking it onto the gun.
Any change in position or angle shifts your aim. Check that the iPhone cannot rotate, wobble or fall off as you move the gun. Holding strength varies with the case and mount.
Watch the iPhone or the big screen
In iPhone mode, keep the screen easy to see. In big-screen mode, aim at the external screen while holding the gun. Keep the camera, microphone and controls clear in both modes.
04 / Before you play
- Raise and move the setup slowly to check for movement or loose attachments.
- Register the sound with the iPhone in its playing position, then check detection in the accuracy test.
- Adjust aiming after mounting. Recalibrate whenever you remount the iPhone.
If the sound is too quiet or inconsistent, you can use a registered voice sound or tap controls.